# Home Assistant files Three files to connect Home Assistant to Kilometer Log. They are the same as what the app shows under **Admin → Home Assistant**, filled in for a Volvo XC40. | File | Where it goes | |---|---| | `configuration.yaml` | Add to Home Assistant's `configuration.yaml`, then restart Home Assistant. | | `secrets.yaml.example` | Add the line to Home Assistant's `secrets.yaml`, with your `HA_TOKEN` after `Bearer `. | | `automation.yaml` | *Settings → Automations & scenes → Create automation → ⋮ → Edit in YAML*: replace everything with it and save. | Before you use them: - **Plate:** replace `AB-123-C` in `configuration.yaml` with your car's plate. - **Entity names:** if your car's entities have other names than `sensor.volvo_xc40_odometer` and `device_tracker.volvo_xc40_location`, change them in `automation.yaml`. - **Address:** `configuration.yaml` reaches the app over Docker's internal network, at `http://kilometer-log:3000`. - Home Assistant runs with `network_mode: host`? Use `http://127.0.0.1:3077` and uncomment the `ports:` lines in the compose file. - Using the public address instead? Use the exact `https://` address, without a redirect. To test it, open the automation and choose **Run actions**. After a minute, Admin → Home Assistant shows "First reading saved". The automation reads the sensor directly, so this manual test works; older versions used `trigger.to_state` and failed when run by hand.